Specialized in Magnesium Tank Sacrificial Anode Exporter India, Excellent Quality in Magnesium Tank Sacrificial Anode With Low Price, Magnesium Tank Sacrificial Anode Inquire, Wide Range Magnesium Tank Sacrificial Anode, Get a Live Quote Now for Magnesium Tank Sacrificial Anode, Magnesium Tank Sacrificial Anode available here, Magnesium Tank Sacrificial Anode Best Factory, Magnesium Tank Sacrificial Anode Competitive Price Here
Calculations
EXTERNAL PROTECTION
The number of anodes for the protection of the hull is calculated based on the following criteria:
A. CURRENT REQUIREMENTS
The wetted surface of the hull times protective current density.
 |
B. SYSTEM DESIGN LIFE
The total weight of anode material required is:
 |
As a result the number of anodes selected must at least satisfy both the total current and total weight requirements as follows:
 |
 |
ANODE LOCATION
The calculated anodes must be installed in equal distances around the hull, about 6 meters apart. The 15% - 20% of the total calculated QTY must be installed to the stern and rudder area of the vessel. The anodes should not be mounted in the zone close to the propeller's edges.
INTERNAL CATHODIC PROTECTION
The cathodic protection of the ship's tanks is effected with sacrificial anode system. Of course, this type of protection can be applied only to water ballast or cargo/ballast tanks. Zinc aluminum or magnesium anodes may be used but for the installation precautions must be taken for avoiding hydrogen evolution (in the case of magnesium) and sparking (in the case of aluminum). The final selection of the alloy to be used will also depend on the ballast water (seawater), the compatibility of the alloy with any cargo, which might be carried in the tank, the size of the protected tank and the type of the vessel.
CURRENT DENSITY REQUIRED FOR PROTECTION
In case, the tank surface is being painted, the anodes will be installed to suppress corrosion on any area with paint defects. The current density of 5mAmp/m2 is normally adequate. In case, of non-coated surface the following current densities are recommended:
» FORE AND AFT PEAK TANK 108mAp/m²
» TOP SIDE TANKS 120mAp/m²
» DOUBLE BOTTOM TANKS 86mAp/m²
» CARGO/CLEAN BALLAST TANK 86mAp/m²
» LOWER WING TANKS 90mAp/m²
The system life should be at least four (4) years. The above-recommended current densities are applicable to ships for which the normal ballast trip is longer than approx. 5 days. In case, the trip is shorter than 5 days, then the above densities should be increased by 20%.
KEYWORDS ::
zinc anodes manufacturers
zinc anodes suppliers
zinc anodes traders
zinc anodes exporter
aluminium anodes manufacturers
aluminium anodes suppliers
aluminium anodes traders
aluminium anodes exporter
sacrificial anodes manufacturer
sacrificial anodes suppliers
sacrificial anodes traders
sacrificial anodes exporters
reinforcement steel zinc anodes manufacturers
reinforcement steel zinc anodes exporter
cathodic protection manuacturers
cathodic protection exporter
corrosion protection manufacturer
corrosion protection exporter
non-ferrous metals castings manufacturers
non-ferrous metals castings exporter
non-ferrous metals castings suppliers
non-ferrous metals castings tradres
anodes exporter worldwide
anodes manufacturer
zinc rods manufacturer
zinc rods exporter
zinc rods supplier
zinc rods traders
zinc pencil exporter
zinc pencil manufacturer
engine anodes manufacturers
engine anodes exporter
zinc hull anodes manufacturers
zinc tank anodes manufacturers
aluminium hull anodes manufacturers
aluminium tank anodes manufacturers
Zinc anode for Platforms and marine structures
Zinc anodes for ship
Marine Aluminium and Zinc Anode
anticorrosion Zinc anode
High grade quality purity zinc anode
Anticorrosion Zinc Anodes for Ship
Zinc anode for seawater cooling system
Quality custom zinc anode for boats
ZAT Type Marine sacrificial zinc anode
Marine Engineering Zinc Anode
High grade quality purity zinc anode
High Hardness Zinc Anode Plate
CNC machining Aluminum Anode Products
marine aluminum anode
Sacrificial Aluminum Anode
zinc plated steel rod
zinc plated DIN975 threaded rod
Zinc Plated Thread Rods
Thread rods & DIN975/976 with Cr+3 zinc plated
manufacturer of pure 99.995% sacrificial anode zinc rod
zinc rod/zinc bar of high purity
Aluminum zinc anode rod
DIN975-Grade 5.6-Yellow Zinc Plated-threaded rods
Female Threaded Rod Zinc Plated
NE-159 DIN975 Zinc Plated Full Threaded Rod
non-ferrous metal castings with machining
non-ferrous metal castings foundry
custom-made non-ferrous metal casting
Non-ferrous Metal Alloy Lathe CNC Machining Parts
Non-ferrous & iron metal castings
Precision non-ferrous metal castings
ZAW-6P Marine sacrificial zinc anode
FeSiCr sacrificial Anode
Magnesium Tank Sacrificial Anode
Indium Zinc Aluminum Alloy Sacrificial Anode
Extruded Magnesium metal rod sacrificial anode for water heater
Aluminum Alloy Sacrificial Anode
High quality zinc sacrificial anode,99.995% pure zinc ingot
Magnesium Sacrificial Anode for oil and gas pipe
car back threshold reinforcing plate
Marine Corrosion Specialist
| Rajesh Metal Syndicate Manufacturers / Exporters / Suppliers & Stockist of Zinc Hull Anodes, Aluminium Hull Anodes, Zinc Tank Anodes, Aluminium Tank Anodes, Zinc Rod, Zinc Pencil, Zinc Strip, Zinc Engine Anodes, Gun Metal & P. Bronze Castings, Brass Plugs, Stainless Steel Pipes, Stainless Steel Shafts Etc. | ||
| Zinc Hull Anodes | Aluminium Hull Anodes | Zinc Tank Anodes |
 |
 |
 |
| Aluminium Tank Anodes | Zinc Rod | Zinc Pencil |
 |
 |
 |
| Zinc Strip | Zinc Engine Anodes | Gun Metal & P. Bronze Castings |
 |
 |
 |
| Brass Plugs | Stainless Steel Pipes | Stainless Steel Shafts |
 |
 |
 |
| Rajesh Metal Syndicate Manufacturers / Exporters / Suppliers & Stockist of Zinc Hull Anodes, Aluminium Hull Anodes, Zinc Tank Anodes, Aluminium Tank Anodes, Zinc Rod, Zinc Pencil, Zinc Strip, Zinc Engine Anodes, Gun Metal & P. Bronze Castings, Brass Plugs, Stainless Steel Pipes, Stainless Steel Shafts Etc. | ||